HomeNews Characteristics of PE film:

Characteristics of PE film:

2023-09-20

Guangdong Huaping Hygiene Material Industrial Co.,Ltd. main products include PE Film,PE breathable film,PE perforated film,Multicolor printed film,Nonwoven Laminated film,Anti-counterfeiting Holographic film etc .As for non-breathable membranes, it has the following properties:


Excellent air permeability has superior and uniform air permeability, effectively isolates moisture, and discharges heat and moisture

More skin-friendly softness, with excellent hand feeling, making the product softer and more comfortable

The best physical and mechanical properties have excellent tensile and elongation properties

PE has good chemical resistance, is not easy to corrode, and is difficult to print


PE film,Nonwoven Laminated film,Anti-counterfeiting Holographic film


Classification of PE Film:

PE material is polyethylene, which is the largest variety of plastic materials. It is a polymer material synthesized from polyethylene. Basically divided into two categories: low-density polyethylene LDPE; high-density polyethylene


HDPE. PE materials are divided into five grades according to internationally unified standards: PE32 grade, PE40 grade, PE63 grade, PE80 grade and PE100 grade. The production of PE pipes for water supply pipes is high-density polyethylene HDPE, and its grade is PE80, and the MRS of PE100 and PE80 reaches 8MPA; the MRS of PE100 reaches 10MPA.


PE is a typical crystalline polymer. There are many types of it, commonly used are LDPE and HDPE, which are translucent plastics with low strength and a specific gravity of 0.94g/cm3 (smaller than water). LDPE is softer, (commonly known as soft rubber) HDPE is commonly known as hard soft rubber, it is harder than LDPE, has poor light transmission and high crystallinity.


About US:

Huaping factory is located in the Zhuxi Industrial Centre of Guangdong-Hongkong-Macau Greater Bay ,China .Our factory area is over 41500 M2,its building area is more than 50000 M2,we have more than 200 workers,40 in management and R&D team ,we strictly implements scientific 7S lean production management process , through ISO9001.2015 quality management system certification ,our product has passed the SGS(European union) certification and passed the certification of safety and health testing institutions by others third-party .


Our domestic website:gdhuaping.com.cn


Previous: Is there a PE film on the sanitary napkin?

Next: What kind of laminating machine is used for laminating printed PE film and air bubble film?

Home

Product

Phone

About Us

Inquiry